Company Info









Sunbee Logo







Home > RV > Charge Controllers
Sort By:
Page of 1
40 Amp Charge Controller with LCD Display 25 Amp Charge Controller with Digital Display Go Power 30 Amp Charge Controller with Display
Our Price: $246.00
Our Price: $199.99 FREE SHIPPING!!!
Our Price: $134.99
Sale Price: $120.00
Savings: $14.99
40 Amp Charge Controller with LCD Display 25 Amp Charge Controller with Digital Display Go Power 30 Amp Charge Controller with Display
The PVCM40D micro-processor based photo-voltaic (PV) charge controller
connects PV panels to 12V or 24V DC storage batteries.  The PVCM40D
determines which mode to operate in, 12V or 24V, by measuring the battery
voltage that powers it.

The PVDM6 display module serves as a remote digital readout for the
PVCM40D and PVDM6 for the PVCM40D charge controllers.  The PVCM
charge controllers contain an internal solar current shunt, RJ-45 network jack
and associated internal wiring to provide power and signals to the PVDM6
through a T568A or T568B standard computer network patch cable which plugs
into the RJ-45 jack on the back of the PVDM6.  If the wrong configuration
network cable, such as the crossover type, is used then the “error” LED on the
back of  the PVDM6 will light indicating that the proper cable needs to  be
plugged in for the display to work properly.  
  
The PVDM6’s normal display indication is battery voltage and its associated
LED.  The select button allows the user to turn on the displays backlight,
advance to the next display setting, reset the solar and battery amp hour
accumulators, lock display or current setting, or activate scroll mode (see User
Instructions).  The PVDM6 will automatically switch back to the battery voltage
display setting after 4 minutes unless the display setting lock is activated.  The
backlight will come on for 15 seconds any time the select button is pushed and
will stay on continuously in scroll mode.
  
If a low battery voltage condition occurs, the display will automatically switch
back to the battery voltage setting (if not already there) and blink the display
reading and Battery voltage LED.  If the user accesses other display settings
while in this condition, they will be displayed for 5 seconds then switch back to
battery voltage setting until the low battery voltage problem is corrected.  Any
accumulated values may be meaningless if the battery voltage remains below
11V as this is the minimum voltage for the PVDM6 to operate properly.  The
PVDM6  display will continue to accumulate amp-hours, they just won’t  be
displayed without reverting back to the flashing battery voltage after 5 seconds.
The battery voltage signal tells the PVDM6 module what battery system voltage
it is: 12V, 24V or 48V.
RV 20 Amp Charge Controller with Display 

If you like to know the exact charge status of your system from inside your RV, this 25 amp charge controller is for you. The light switch-sized display monitors battery voltage, solar charge current, accumulated solar amp hours, and percent battery charge remaining. It is fully automatic for 12v or 24v systems.

INCLUDES: 25 amp charge controller with display

Go Power RV 30 AMP Pulse Width Modulated Digital Solar Regulator

The Go Power! GP-PWM-30 is a 30 Amp Pulse Width Modulated digital charge solar regulator.  The digital display shows the battery voltage, charging current and battery state of charge as a percentage. Expandable capability can handle 4-5 solar panels with a capacity of over 500 watts or 30 amps.  It charges the batteries using a 4 stage battery charging algorithm. The GP-PWM-30 can charge any type of batteries and is adjustable for wet cell batteries, AGM batteries, and gel batteries.
40 Amp Charge Controller with Display Port 25 Amp Charge Controller with Display Port 25 Amp Charge Controller
Our Price: $90.00
Our Price: $78.00
List Price: $74.99
Our Price: $70.00
Savings: $4.99
40 Amp Charge Controller with Display Port 25 Amp Charge Controller with Display Port 25 Amp Charge Controller

The micro-processor based PVCM40D photo-voltaic (PV)
charge controller is used to connect PV panels to 12V or 24V
DC storage batteries.  The PVCM determines which mode to
operate in, 12V or 24V, by measuring the battery voltage that 
powers it. 

This reliable inline charge controller has an ethernet display port (Display not Included) and can handle up to 25 amps. It uses a micro controller for digital accuracy and pulse action to reduce battery sulfation. The LED status indicator lights will allow you to monitor battery levels and charge status. It is fully automatic for 12v or 24v systems.

25 AMP IN-LINE SOLAR CHARGE CONTROLLER 12/24 VDC

This reliable inline charge controller can handle up to 25 amps. It uses a micro controller for digital accuracy and pulse action to reduce battery sulfation. The LED status indicator lights will allow you to monitor battery levels and charge status. It is fully automatic for 12v or 24v systems.


INCLUDES:


  • 25 amp charge controller
  • 10 Amp Charge Controller
    Our Price: $44.00
    10 Amp Charge Controller

    RV 10 Amp Charge Controller

    This reliable inline charge controller is great for smaller systems. It can handle up to 10 amps and uses a micro controller for digital accuracy. This controller has an LED status indicator light and is fully automatic for 12v or 24v systems.

    INCLUDES:

    • 10 amp charge controller