Technical Info
Panel:
Peak Power (+/- 5%) 90 Watt/
Rated Voltage (Vmp) 17.86 V
Rated Current (Imp) 5.04 A
Open Circuit Voltage (Voc) 21.6 V
Short Circuit Current (Isc) 5.45 A
Front Glass Tempered – 3.2mm Thick
Frame Aluminum Alloy
Net Weight 18 lbs
Length 39 “
Width 26..81 “
Height 1.37 “
10 AMP IN-LINE SOLAR CHARGE CONTROLLER 12/24 VDC
- In-Line charge Controller
- Micro Controller for digital accuracy and reliability
- Fully automatic operation on 12V or 24V DC systems
- Built in temperature compensation
- LED indication of solar charge
- Will handle up to 10 Amps @ 28V DC from solar panels
- Pulse action reduces battery sulfation
- This charge controller connects solar panels to storage batteries. It will sense when battery is fully charged and disconnects the panel charge current to avoid overcharging.
- It resumes when battery voltage has dropped sufficiently to accept additional charge current.
- It checks availability of solar charge current, by cycling the relay every 4 minutes. If there is insufficient charge current available, it will disconnect the battery to prevent battery discharge through the solar panel at night.
- It compensates for battery temperature and adjusts the charge threshold voltages when mounted in battery case.
Size .875 x 3.2 x 1.2
Weight 3 ounces
Enclosure Epoxy potted in PVC Plastic
Mounting Double stick tape
Power 6 to 35 V DC from storage battery
Load Capacity 12 Amps @ 14V DC 10 Amps @ 28V DC
-
(minimum 5 watt panel)