PVCM40D SPECIFICATIONS PVDM6 SPECIFICATIONS
SIZE/WEIGHT: 2.1 x 4.0 x 1.3 inches, 6 ounces SIZE/WEIGHT: 2.75 x 4.5 x .75 inches, 3 ounces
ENCLOSURE: Epoxy potted in PVC plastic
MOUNTING: 2 #10 x .75" L screws (not provided)
POWER: 6 to 30 V DC from storage battery
LOAD CAPACITY: 40 Amps @ 28V DC
(minimum is a 20 watt panel)
TEMPERATURE Flooded Battery Thresholds:
COMPENSATION: below 0C On @ 13.3VDC Off @ 15.0VDC
between 0-5C On @ 13.3VDC Off @ 14.8VDC
between 5-10C On @ 13.1VDC Off @ 14.6VDC
between 10-15C On @ 12.9VDC Off @ 14.4VDC
between 15-30C On @ 12.7VDC Off @ 14.2VDC
between 30-35C On @ 12.7VDC Off @ 14.0VDC
between 35-40C On @ 12.6VDC Off @ 13.8VDC
between 40-45C On @ 12.6VDC Off @ 13.6VDC
Temps > 45C On @ 12.7VDC Off @ 14.2VDC.
Sealed Battery Thresholds: *Blue Jumper Clipped *
Voltages are 0.3VDC less than above threshold voltages.
Rm temp 20-25C On @ 12.4VDC Off @ 13.9VDC
Double above threshold values for 24V DC systems.
CURRENT DRAW: Continuous - [7mA
During charge - [ 55mA
LED INDICATION: Battery Voltage
Red Charging Mode
Green ] 12.75VDC or 25.5VDC
Yellow 11.2VDC to 13.3VDC or
22.4VDC to 25.5VDC
Orange [ 11.2V or 22.4V
VOLTAGE DROP: 0.10V DC @ 40 Amps
MINIMUMS: Charge current - 80mA
Open PV Voltage - 16V or 32V DC
ELECTRICAL 1/4-20" Brass bolts - power
CONNECTIONS: 1/4" Spade connections - other
TEMP. SENSOR: LM 335Z precision temp. sensor
TEMPERATURE: -30 to 75C
RELAY LIFE: 100 million mechanical operations
PVDM6 SPECIFICATIONS
SIZE/WEIGHT: 2.75 x 4.5 x .75 inches, 3 ounces
MOUNTING: Single - gang electric box or surface mount with cutout
POWER: 12 to 24V DC from PVCM40D or
12 to 48V with PVDAM adaptor
CURRENT DRAW: 15 mA normal mode
35 mA with back light on
CONNECTION: RJ-45 jack to T568A or T568B network Cat-5 patch cable
CONTROL: Single select/reset button
DISPLAY: 3 digit LCD to 999 or 99.9 with decimal
.35 inch character height
VOLTAGE: Displays 0 to 60V DC
CURRENT
DISPLAY: 0 to 100 Solar Charge Amps
(below .25 amps the display will indicate “chr”
if the controller is charging)
0 to 500 Battery Load Amps
BATTERY PERCENT While charging reads 100%
DISPLAY: 12.8V = 100%, 10.8V = 0%, 12V system
25.6V = 100%, 21.6V = 0%, 24V system
51.2V = 100%, 43.2V = 0%, 48V system
LOW BATTERY Detects @ 11.2V, 22.4V & 44.8V
VOLTAGE: for 12V, 24V & 48V systems
AMP-HOURS: Displays 0 TO 999 accumulated
TEMPERATURE: 0 to 50C