Technical Info
Panel:
Peak Power (+/- 5%) 90 Watt/
Rated Voltage (Vmp) 17.86 V
Rated Current (Imp) 5.04 A
Open Circuit Voltage (Voc) 21.6 V
Short Circuit Current (Isc) 5.45 A
Front Glass Tempered – 3.2mm Thick
Frame Aluminum Alloy
Net Weight 18 lbs
Length 39 “
Width 26..81 “
Height 1.37 “
25 AMP IN-LINE SOLAR CHARGE CONTROLLER 12/24 VDC:
In-Line charge Controller
Micro Controller for digital accuracy and reliability
Fully automatic operation on 12V or 24V DC systems
Built in temperature compensation
LED status indication of solar charge and battery level
Can handle up to 25 Amps @ 28V DC from solar panels
Pulse action reduces battery sulfation
This charge controller connects solar panels to storage batteries. It will sense when battery is fully charged and disconnects the panel charge current to avoid overcharging.
It resumes when battery voltage has dropped sufficiently to accept additional charge current. It checks availability of solar charge current, by cycling the relay every 4 minutes. If there is insufficient charge current available, it will disconnect the battery to prevent battery discharge through the solar panel at night.
It compensates for battery temperature and adjusts the charge threshold voltages when mounted in battery case.
Its microprocessor reduces the charging rate of fully charged batteries to minimize water additional requirements.
Size 2.1 x 4 x 1.3
Weight 6 ounces
Enclosure Epoxy potted in PVC plastic
Mounting 2#10 x .75 L screws (not included)
Power 6 to 30 V DC from storage battery
Load Capacity 25 Amps @ 28V DC (minimum 20 watt panel)
