Company Info









Sunbee Logo







Home > Cabin > Charge Controllers
Sort By:
Page of 1
10 Amp Charge Controller
10 Amp Charge Controller
Our Price: $44.00

RV 10 Amp Charge Controller

This reliable inline charge controller is great for smaller systems. It can handle up to 10 amps and uses a micro controller for digital accuracy. This controller has an LED status indicator light and is fully automatic for 12v or 24v systems.

INCLUDES:

  • 10 amp charge controller
25 Amp Charge Controller
25 Amp Charge Controller
List Price: $74.99
Our Price: $70.00
Savings: $4.99

25 AMP IN-LINE SOLAR CHARGE CONTROLLER 12/24 VDC

This reliable inline charge controller can handle up to 25 amps. It uses a micro controller for digital accuracy and pulse action to reduce battery sulfation. The LED status indicator lights will allow you to monitor battery levels and charge status. It is fully automatic for 12v or 24v systems.


INCLUDES:


  • 25 amp charge controller
  • 25 Amp Charge Controller with Display Port
    25 Amp Charge Controller with Display Port
    Our Price: $78.00

    This reliable inline charge controller has an ethernet display port (Display not Included) and can handle up to 25 amps. It uses a micro controller for digital accuracy and pulse action to reduce battery sulfation. The LED status indicator lights will allow you to monitor battery levels and charge status. It is fully automatic for 12v or 24v systems.
    40 Amp Charge Controller with Display Port
    40 Amp Charge Controller with Display Port
    Our Price: $90.00


    The micro-processor based PVCM40D photo-voltaic (PV)
    charge controller is used to connect PV panels to 12V or 24V
    DC storage batteries.  The PVCM determines which mode to
    operate in, 12V or 24V, by measuring the battery voltage that 
    powers it. 

    Go Power 30 Amp Charge Controller with Display
    Go Power 30 Amp Charge Controller with Display
    Our Price: $134.99
    Sale Price: $120.00
    Savings: $14.99


    Go Power RV 30 AMP Pulse Width Modulated Digital Solar Regulator

    The Go Power! GP-PWM-30 is a 30 Amp Pulse Width Modulated digital charge solar regulator.  The digital display shows the battery voltage, charging current and battery state of charge as a percentage. Expandable capability can handle 4-5 solar panels with a capacity of over 500 watts or 30 amps.  It charges the batteries using a 4 stage battery charging algorithm. The GP-PWM-30 can charge any type of batteries and is adjustable for wet cell batteries, AGM batteries, and gel batteries.
    25 Amp Charge Controller with Digital Display
    25 Amp Charge Controller with Digital Display
    Our Price: $199.99 FREE SHIPPING!!!

    RV 20 Amp Charge Controller with Display 

    If you like to know the exact charge status of your system from inside your RV, this 25 amp charge controller is for you. The light switch-sized display monitors battery voltage, solar charge current, accumulated solar amp hours, and percent battery charge remaining. It is fully automatic for 12v or 24v systems.

    INCLUDES: 25 amp charge controller with display
    40 Amp Charge Controller with LCD Display
    40 Amp Charge Controller with LCD Display
    Our Price: $246.00

    The PVCM40D micro-processor based photo-voltaic (PV) charge controller
    connects PV panels to 12V or 24V DC storage batteries.  The PVCM40D
    determines which mode to operate in, 12V or 24V, by measuring the battery
    voltage that powers it.

    The PVDM6 display module serves as a remote digital readout for the
    PVCM40D and PVDM6 for the PVCM40D charge controllers.  The PVCM
    charge controllers contain an internal solar current shunt, RJ-45 network jack
    and associated internal wiring to provide power and signals to the PVDM6
    through a T568A or T568B standard computer network patch cable which plugs
    into the RJ-45 jack on the back of the PVDM6.  If the wrong configuration
    network cable, such as the crossover type, is used then the “error” LED on the
    back of  the PVDM6 will light indicating that the proper cable needs to  be
    plugged in for the display to work properly.  
      
    The PVDM6’s normal display indication is battery voltage and its associated
    LED.  The select button allows the user to turn on the displays backlight,
    advance to the next display setting, reset the solar and battery amp hour
    accumulators, lock display or current setting, or activate scroll mode (see User
    Instructions).  The PVDM6 will automatically switch back to the battery voltage
    display setting after 4 minutes unless the display setting lock is activated.  The
    backlight will come on for 15 seconds any time the select button is pushed and
    will stay on continuously in scroll mode.
      
    If a low battery voltage condition occurs, the display will automatically switch
    back to the battery voltage setting (if not already there) and blink the display
    reading and Battery voltage LED.  If the user accesses other display settings
    while in this condition, they will be displayed for 5 seconds then switch back to
    battery voltage setting until the low battery voltage problem is corrected.  Any
    accumulated values may be meaningless if the battery voltage remains below
    11V as this is the minimum voltage for the PVDM6 to operate properly.  The
    PVDM6  display will continue to accumulate amp-hours, they just won’t  be
    displayed without reverting back to the flashing battery voltage after 5 seconds.
    The battery voltage signal tells the PVDM6 module what battery system voltage
    it is: 12V, 24V or 48V.